can watch [ < port > ] Will reprogram the CAN controller into a receive only permiscous mode, where all CAN packets can be displayed. If no <port> parameter is specified, then the output is sent to the current 'Console" serial port. If the <port> parameter is specified, then the output will be sent to the sepcified serial port. Note that when using this special CAN mode, the CAN controller is not functioning normally. It is only receiving CAN packets, but not responding to any of them. Gravure Japanese_Newspaper_OEM_Engine Lotem_400_Fiber_Head_Machine Lotem_800_Fiber_Head_Machine Lotem_Quantum Magnus_400 Magnus_VLF SAT_SNIF Slave_MCE_Firmware Thermoflex Trendsetter_400/800 Trendsetter_NEWS You must reboot the firmware to exit this special CAN monitoring mode. This command is available. Developer 13-Aug-2001 ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:24:20 2008 PST